TEL: +86-731-84632066
Categories
Contact Us

Add: 80th East Jinque Road, Wujiaxiang Industrial District, Yisuhe Town, Xiangtan County, Hunan Province, P.R.China.
Contact: Rosemary Han
Mob: +86-15570895049
Tel: +86-731-84632066
E-mail: sales2@zhmachines.com

News
Home > News > Content
Discussion On The Characteristics Of Two Kinds Of Molded Pulp Products In Operation
Mar 21, 2018

Due to the need of environmental protection, paper pulp molding as a new industry is gradually towards the society, but in recent years, in the minds of most americans, paper pulp molding products is paper tableware, packaging material to have clear understanding on paper mould industry. Since 1992, the author has been in charge of the preparation work of three joint industrial paper mold products factories, and has also been involved in the operation of paper mould tableware for several years. These two types of paper model projects in the management of the characteristics of a superficial analysis and comparison, for the purpose of the units and individuals in these projects for reference.


1. The market of pulp moulding products must be formed.

With the strengthening of environmental protection consciousness, no matter domestic or abroad at the end of the industrial products packaging will be gradually and limit foam large applications, industrial paper holder is an ideal alternatives. This has been demonstrated by our own years of development. Hong Kong bao da environmental protection packaging development co., LTD., invest in dongguan at the end of 1994, established the first industrial paper production line, due to the continuous improvement of technology and management, the success of market development, has become a owns two each have ten thousand square meters large paper factory, a total of eight production lines. New factories are still being built in Beijing and suzhou.

From the point of view of the market, the paper model tableware in the national legislation ban foam plastic tableware production deadline, the market demand will also rapidly increase. In addition, because the production cost of foreign paper model tableware is generally higher than our country, there is also a large demand in foreign markets.


2. The low-grade raw materials are used to package high-value items, which are the economic basis for the good return of the paper model industrial packaging materials. Paper mould industry in general is the use of carton's leftover material of raw materials, and old newspapers do they value cheap, plentiful, and packaging object is often some high-end electronic products, machinery parts, arts and crafts. For example, computer hardware, stereo, mobile phone, fax machine, high-end telephone, micro motor, auto parts, lamps and so on. Due to the high value of the package itself, the internal packaging costs that the customer can accept are also relatively high. In this respect, the tableware of pulp moulding products is the opposite. They use high-grade materials to pack low-value items, which makes the profit more difficult.


3. The production technology of industrial packaging paper mould is high, and it is not easy to be in a mess. Due to industrial packaging paper mold every style is a special new products, are designed and built model, system model, test and revision procedures to full scale production, add how much profit and production technology and management level has a lot to do, so investors must be thoughtful, in addition to the money problems to consider personnel, professional training, etc., not as long as the funds in place like paper tableware, pick a device suppliers immediately can mount a horse.


4, used as industrial packaging paper mould, variety and the continuous production of products in general every style of the time not too long, therefore not easy to appear the situation of interacting with each other in the same products competitive. And the paper tableware variety is monotonous, each style continuous production time is very long, extremely easy to appear the situation of vicious competition.


5. The geometric shapes of industrial packaging paper products are complicated, and the bulk of the same design is large after packing, and the long-distance transportation costs are high, so it is not easy to have cross-regional competition. And the paper model tableware is simple and easy to stack, so the long-distance transportation cost is low. As long as there is a market, cross-regional sales competition is very likely to occur.


6. For the same packaging material, the production cost of paper mold products of industrial packaging is close to that of foam plastics. Therefore, it is possible to gain a firm footing in the market without the inclination of policies. However, the production technology of paper model tableware is two to three times that of foamed plastics, so it cannot be squeezed in the tableware market without relying on the inclination of policy and strengthening of law enforcement. The recent closure of a number of paper-based tableware factories can also prove this.


7. The requirements for site selection of two types of paper mold products factory are different. Paper mold factory site selection must follow the market, that is, close to users. Because of the various types of paper mold packaging products, the shape is complex, can not be packed tightly packed, so the freight is higher. In addition, users are often relatively regular large enterprises, they pursue the zero inventory of packaging materials, require the supplier small batch, uninterrupted supply, so it is not suitable for long-distance transportation. Generally speaking, the supply radius should not exceed.


8. The site selection of paper model tableware is different. Because the products can be tightly packed, the bulk transport costs are extremely low, so it is not necessary to be close to the market. It is more important to build a factory in a place with a cost advantage, because at present, due to different geographical and other objective conditions in China, the production cost of paper model tableware is very different. For example, in some places, the electricity fee is only 0.35 ~ 0.4 yuan/degree, while in many places it is 0.7 to 0.9 yuan/degree; In some places, it is possible to use wet pulp directly. The cost of raw materials is only 2,000 yuan/ton, while the average factory can only use the raw pulp board for the raw material cost of 3000 ~ 4000 yuan/ton. In some areas, the average monthly salary is only 3500 ~ 4000 yuan/month, while the average factory in the general area also needs 5000 ~ 6000 yuan/month. The difference between the three cost elements (energy, materials, and labor) will result in a large difference in the production cost of the plant in different locations. If you have a market and no cost advantage, it is very dangerous to run the business, because you will be crushed by cheap out-of-town goods.


Comprehensive analysis and comparison of the above, the author thinks that from the business point of view, if investors under the condition of the production cost is not competitive advantage, choose paper tableware this project is risky, but report is higher. On the contrary, it is less risky to choose the paper mould industrial packaging material, but there is still a big chance to get good returns.

  • Contact Us

    Add: 80th East Jinque Road, Wujiaxiang Industrial District, Yisuhe Town, Xiangtan County, Hunan Province, P.R.China.
    Contact: Rosemary Han
    Mob: +86-15570895049
    Tel: +86-731-84632066
    E-mail: sales2@zhmachines.com

  • Categories
  • Copyright © Xiangtan ZH Pulp Moulded Co.,Ltd. All Rights Reserved.