TEL: +86-731-84632066
Categories
Contact Us

Add: 80th East Jinque Road, Wujiaxiang Industrial District, Yisuhe Town, Xiangtan County, Hunan Province, P.R.China.
Contact: Rosemary Han
Mob: +86-15570895049
Tel: +86-731-84632066
E-mail: sales2@zhmachines.com

News
Home > News > Content
It Is Not Suitable For Large Automatic Production Line To Be Used For Manufacturing Paper Mould
Mar 21, 2018

1, because this kind of equipment is mostly several or even dozens of mold work on the same body of revolution, generally a single mold suction pulp and dehydration time can't adjust independently, it will not be able to adapt to a wide variety, industrial products with different thickness of paper production. There are also some different location of the mold can adjust the plasma absorption time independently, but the whole body of revolution movement must be suction slurry dewatering longest mold speed required for operation, so the production efficiency is affected.

2, large automatic production line for pulp only one system, not according to the requirements of the several different products supply different material or different concentrations of pulp, if only a factory production line, is it very poor adaptability of the market.

3, large automatic production line of forming machine is set with large drying line, a variety of shapes, thickness varies due to the product (if each station plasma absorption time adjustable), can only choose when drying at low temperature and speed drying, can appear otherwise easily dried products are yellow or difficult to dry product drying and dry phenomenon.

4, due to the large automatic forming machine stripping down the shapes of the semi-finished products in the dryer on the conveyor belt of the arrangement of space is larger, optimum into dry line drying of effective area utilization rate is low, cause the waste of energy.

5. Arrange production on large automatic production line, and there will be some trouble in management. If the production requirements of each type of paper mould product are different, the phenomenon of the adjustment of the die will often appear, and if there is a quality problem in a certain station, the machine should stop to check and deal with it. These conditions affect overall productivity.


  • Contact Us

    Add: 80th East Jinque Road, Wujiaxiang Industrial District, Yisuhe Town, Xiangtan County, Hunan Province, P.R.China.
    Contact: Rosemary Han
    Mob: +86-15570895049
    Tel: +86-731-84632066
    E-mail: sales2@zhmachines.com

  • Categories
  • Copyright © Xiangtan ZH Pulp Moulded Co.,Ltd. All Rights Reserved.